datasheet low skew 1 to 4 clock buffer IDT5T30553 idt? / ics? low skew 1 to 4 clock buffer 1 IDT5T30553 rev c 090209 description the IDT5T30553 is a low skew, single input to four output, clock buffer. idt makes many non-pll and pll based low skew output devices as well as zero delay buffers to synchronize clocks. contact us for all of your clocking needs. features ? extremely low skew outputs (50 ps maximum) ? packaged in 8-pin soic ? pb-free, rohs compliant ? low power cmos technology ? operating voltages of 2.5 v to 3.3 v ? output enable pin tri-states outputs ? industrial (-40 to +85c) temperature range block diagram q0 iclk q1 q2 q3 output enable
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 2 IDT5T30553 rev c 090209 pin assignment pin descriptions external components a minimum number of external components are required fo r proper operation. a decoupling capacitor of 0.01 f should be connected between vdd on pin 1 and gnd on pin 4, as close to the device as possible. a 33 ? series terminating resistor may be used on each clock output if the trace is longer than 1 inch. to achieve the low output skew that the IDT5T30553 is capable of, careful attention must be paid to board layout. essentially, all four outputs must have identical terminations, identical loads and identical trace geometries. if they do not, the output skew will be de graded. for examp le, using a 30 ? series termination on one output (with 33 ? on the others) will ca use at least 15 ps of skew. 1 2 3 vdd 4 q0 q1 q3 gnd q2 iclk 8 7 6 5 oe 8-pin soic pin number pin name pin type pin description 1 vdd power connect to +2.5 v or +3.3 v. 2 q0 output clock output 0. 3 q1 output clock output 1. 4 gnd power connect to ground. 5 iclk input clock input. 6 q2 output clock output 2. 7 q3 output clock output 3. 8 oe input output enable. tri-states outputs when low. connect to vdd for normal operation.
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 3 IDT5T30553 rev c 090209 absolute maximum ratings stresses above the ratings listed below can cause per manent damage to the IDT5T30553. these ratings, which are standard values for idt commercially rated parts, are stress ratings only. functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for exte nded periods can affect product reliability. electrical parameters are guaranteed only over the recommended operating temperature range. recommended operation conditions dc electrical characteristics vdd=2.5 v 5% , ambient temperature -40 to +85 c, unless stated otherwise item rating supply voltage, vdd 7 v output enable and all outputs -0.5 v to vdd+0.5 v iclk -0.5 v to 3.3 v ambient operating temperature (industrial) -40 to +85 c storage temperature -65 to +150 c junction temperature 125 c soldering temperature 260 c parameter min. typ. max. units ambient operating temperature (industrial) -40 +85 c power supply voltage (measured in respect to gnd) +2.375 +3.45 v parameter symbol conditions min. typ. max. units operating voltage vdd 2.375 2.625 v input high voltage, oe v ih 1.8 vdd v input low voltage, oe v il 0.7 v output high voltage v oh i oh = -16 ma 2 v output low voltage v ol i ol = 16 ma 0.4 v operating supply current idd no load, 135 mhz 25 ma nominal output impedance z o 20 ? input capacitance c in iclk, oe pin 5 pf short circuit current i os 28 ma
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 4 IDT5T30553 rev c 090209 dc electrical characteristics (continued) vdd=3.3 v 5% , ambient temperature -40 to +85 c, unless stated otherwise notes: 1. nominal switching threshold is vdd/2 parameter symbol conditions min. typ. max. units operating voltage vdd 3.15 3.45 v input high voltage, oe v ih 2vddv input low voltage, oe v il 0.8 v output high voltage v oh i oh = -25 ma 2.4 v output low voltage v ol i ol = 25 ma 0.4 v output high voltage (cmos level) v oh i oh = -12 ma vdd-0.4 v operating supply current idd no load, 135 mhz 35 ma nominal output impedance z o 20 ? input capacitance c in iclk, oe pin 5 pf short circuit current i os 50 ma
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 5 IDT5T30553 rev c 090209 ac electrical characteristics vdd = 2.5 v 5% , ambient temperature -40 to +85 c, unless stated otherwise vdd = 3.3 v 5% , ambient temperature -40 to +85 c, unless stated otherwise notes: 1. with rail to rail input clock. 2. between any 2 outputs with equal loading. 3. duty cycle on outputs will match incoming clock duty cycle. consult idt for tight duty cycle clock generators. thermal characteristics parameter symbol conditions min. typ. max. units input frequency 0 200 mhz output rise time t or 0.8 to 2.0 v, c l =15 pf 1.0 1.5 ns output fall time t of 2.0 to 0.8 v, c l =15 pf 1.0 1.5 ns additive period jitter 1 ps propagation delay note 1 2.2 3 5 ns output to output skew note 2 rising edges at vdd/2 0 50 ps device to device skew rising edges at vdd/2 500 ps parameter symbol conditions min. typ. max. units input frequency 0 200 mhz output rise time t or 0.8 to 2.0 v, c l =15 pf 0.6 1.0 ns output fall time t of 2.0 to 0.8 v, c l =15 pf 0.6 1.0 ns propagation delay note 1 2.0 2.4 4 ns additive period jitter 1 ps output to output skew note 2 rising edges at vdd/2 0 50 ps device to device skew rising edges at vdd/2 500 ps parameter symbol conditions min. typ. max. units thermal resistance junction to ambient ja still air 150 c/w ja 1 m/s air flow 140 c/w ja 3 m/s air flow 120 c/w thermal resistance junction to case jc 40 c/w
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 6 IDT5T30553 rev c 090209 package outline and package dimensions (8-pin soic, 150 mil. narrow body) package dimensions are kept current with jedec publication no. 95 ordering information parts ordered with a ?g? after the tw o-letter package code are the pb-free configuration and are rohs compliant. while the information presented herein has been checked for both accuracy and reliability, integrated device technology (idt) r esult from its use. no other circuits, patents, or li censes are implied. this product is intended for use in normal commercial application s. any other applications such as those requiring exte nded temperature range, high reliability, or other extraordinary environmental require ments are not recommended without additional processing by idt. idt reserves the right to change any circui try or specifications without notice. idt does not authorize or warrant any idt product for use in life support devices or critical medical instruments. part / order number marking shipping packaging package temperature 5t30553dcg tbd tubes 8-pin soic 0 to +70 c 5t30553dcg8 tape and reel 8-pin soic 0 to +70 c 5t30553dcgi tbd tubes 8-pin soic -40 to +85 c 5t30553dcgi8 tape and reel 8-pin soic -40 to +85 c index area 1 2 8 d e seating plane a1 a e - c - b .10 (.004) c c l h h x 45 *for reference only. controlling dimensions in mm. millimeters inches* symbol min max min max a 1.35 1.75 .0532 .0688 a1 0.10 0.25 .0040 .0098 b 0.33 0.51 .013 .020 c 0.19 0.25 .0075 .0098 d 4.80 5.00 .1890 .1968 e 3.80 4.00 .1497 .1574 e 1.27 basic 0.050 basic h 5.80 6.20 .2284 .2440 h 0.25 0.50 .010 .020 l 0.40 1.27 .016 .050 0 8 0 8
IDT5T30553 low skew 1 to 4 clo ck buffer fan out buffer idt? low skew 1 to 4 clock buffer 7 IDT5T30553 rev c 090209 revision history rev. originator date description of change b p. keyashian 02/17/09 added industrial temp ordering information. c p. keyashian 09/02/09 added ?additive period jitter? spec.
? 2006 integrated device technology, inc. all rights reserved. product specifications subject to change without notice. idt and the idt logo are trademarks of integrated device technology, inc. accelerated thinking is a service mark of integrated device technology, inc. all other brands, product names a nd marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. printed in usa corporate headquarters integrated device technology, inc. www.idt.com for sales 800-345-7015 408-284-8200 fax: 408-284-2775 for tech support www.idt.com/go/clockhelp innovate with idt and accelerate your future netw orks. contact: www.idt.com IDT5T30553 low skew 1 to 4 clock buffer fan out buffer
|
